my dark eldar have been the glass hammer that have so far served me well. but as tzeentch says the only constant is change and with so 2 new codexs comming out (chaos marines +deamons) where getting closer to the change.
iv struggled with the concept for my chaos for ages keep them as loyalists using the chaos book was my first idea then i coulds still keep original world eaters as i wanted to do fill them out and make a full armoured company that is in most heresy books usually somthing like this
landraider
rhinos
IG units
dreads
flyers
my second idea go full chaos as i want some of the new models they look amazing. especially the hellbrute and dragon flyer but then the old world eaters wouldnt fit
so my final idea is this to have the legion style lay out as above with my original world eatersadn everything else slowly falling into chaos ill keep the original blue/white colour to keep the army cohesive on to the chaos armour and then add more blood red to show them turning to khorne.
now all thats out the way here are the juicy pics of the dark vengeance stuff !!
Saturday, 1 September 2012
unboxing dark vengeance!!!
ok guys dark vengeance is here so lets get to it
firstly the box is lovely and glossy lots better than the black reach 1
as you can see lovely :D hehe although 6 dice isnt enough lol here is the lay out of the box. their is lots of space that could have been shrunk a little.
next is the roster for each army it doesnt give points values for anything jus the equipment if u flp it over their is a quick reference sheet for the armies and special rules that youll use
so thats dark vengeance!!! a great box models up next
firstly the box is lovely and glossy lots better than the black reach 1
as you can see lovely :D hehe although 6 dice isnt enough lol here is the lay out of the box. their is lots of space that could have been shrunk a little.
here is the chaplian not snap fit. its lovely with plenty of detail at this point ill mention every model is full of detail since their mostly snap fit ill post pics in a seperate article!!
next is the roster for each army it doesnt give points values for anything jus the equipment if u flp it over their is a quick reference sheet for the armies and special rules that youll use
next is the seal pack this contains the rule book more of the same sheets and a how to pay intro giude with rules and missions as well as a book or building all the models.
so thats dark vengeance!!! a great box models up next
Friday, 24 August 2012
wyches armour done!!
first n foremost since grandad nev has has been reading the blogs ill point out that he very graciously let me borrow his airbrush and compressor to use. their u go nev sum recognition
so iv bin busy and fully highlighted 10 wyches 4 left to do!!!
i also have a few extra wyches that im painting up as well.
here they are bit blurry but u get the idea
whats next for the wyches
hair
weapons
skin
so iv bin busy and fully highlighted 10 wyches 4 left to do!!!
i also have a few extra wyches that im painting up as well.
here they are bit blurry but u get the idea
whats next for the wyches
hair
weapons
skin
Tuesday, 21 August 2012
even more spraying
so iv started the days spraying by getting a new can of spray paint and spraying the last few bits and peices white. the only thing left to spray white are the vehicles.
so whats left to do
3venoms
2 ravagers
1 raider
need to be sprayed white
3 venoms pre shading with black
2 ravagers pre shading with black
1 raider pre shading with black
8 gaurdian arms needs pre shading with black
1 warwalker needs pre shading with black
1 gun platform needs pre shading with black
then
3 venoms spraying in first colour
2 ravagers basing in first colour
1 raider basing in first colour
8 gaurdian arms needs spraying blood red
1 warwalker needs spraying blood red
1 gun platform needs spraying blood red
after all that the entire army will be based at the very least in their first colour then i have to paint all the detail on them later 2day the pre shading will be done and the blood red will be sprayed on the arms
so whats left to do
3venoms
2 ravagers
1 raider
need to be sprayed white
3 venoms pre shading with black
2 ravagers pre shading with black
1 raider pre shading with black
8 gaurdian arms needs pre shading with black
1 warwalker needs pre shading with black
1 gun platform needs pre shading with black
then
3 venoms spraying in first colour
2 ravagers basing in first colour
1 raider basing in first colour
8 gaurdian arms needs spraying blood red
1 warwalker needs spraying blood red
1 gun platform needs spraying blood red
after all that the entire army will be based at the very least in their first colour then i have to paint all the detail on them later 2day the pre shading will be done and the blood red will be sprayed on the arms
Monday, 20 August 2012
more spraying
so iv done abit more keep plugging at it :P so what have i done iv shaded all the gaurdians that i had sprayed white then iv sprayed them blood red as well as half a warwalker.
so whats left to do with the eldar contingent:
the farseer needs spraying red
2 gaurdians need spraying white shading and spraying red
1 warwalker needs spraying a little more with white then shading then doing red
1 platform needs abase making then spraying white then shading then spraying red
the arms ofthe gaurdians need spraying white shading and spraying red
after all that they need highlighting with blazing orange and the gems are green!! then their done
so whats left to do with the eldar contingent:
the farseer needs spraying red
2 gaurdians need spraying white shading and spraying red
1 warwalker needs spraying a little more with white then shading then doing red
1 platform needs abase making then spraying white then shading then spraying red
the arms ofthe gaurdians need spraying white shading and spraying red
after all that they need highlighting with blazing orange and the gems are green!! then their done
Sunday, 19 August 2012
the begining of a new army!!
so iv been mega busy with my airbrush and done plenty of hardcore spraying i kno have this many models left to base
1 wych with an agoniser
3 true born
ill have a go at the vehicles this after noon.so heres how their looking so far starting with the wyches
1 wych with an agoniser
3 true born
a lovely group shot awwww lol next a close up of a wych so u can see the armour
here is the same wych from the back so u can see the shading
next is a comparison shot of the old armour compared to the new armour
now its tme for the trueborn!
and their we have it
Friday, 17 August 2012
GW reply wat a surprise
well gw have replied and thoroughly surprised, they are sending me a free exalted seeker kit!! so the little guy won :D
so now with the original kit ill be building the exalted seeker chariot so without further a do lets go!!!
this kit will be done in parts for ease of transporting it
firstly front chasis assembly
done here is the pic it was easy enough!! lol
next the combine harvesters of doom!!!
that was easy again and it attaches to the chasis in the middle u may not need 2 glue it but heres how it will look.
now its time to put 2 gether the steeds that will pull the mights combine harvester of doom!!
here how its looking so far its a huge model transporting 3 of these will be hard
now its time to buil the to chasis at this point check the depth of where it will be carried i reckon this kit will be 3.5 inch tall mayber taller which means ull struggle 2 fit it in standard GW cases
now more harvesters of doom!!!
and here is how it looks so far
now from here on it gets fiddly as im keeping it a all seperate untill i fgure out how much space i need and for painting
next the riders were glued and the seats and here they are
it wont be fully built untill iv painted it so stay tuned
apoligies for uploading it and forgetting to add the pics lol
so now with the original kit ill be building the exalted seeker chariot so without further a do lets go!!!
this kit will be done in parts for ease of transporting it
firstly front chasis assembly
done here is the pic it was easy enough!! lol
next the combine harvesters of doom!!!
that was easy again and it attaches to the chasis in the middle u may not need 2 glue it but heres how it will look.
now its time to put 2 gether the steeds that will pull the mights combine harvester of doom!!
here how its looking so far its a huge model transporting 3 of these will be hard
now its time to buil the to chasis at this point check the depth of where it will be carried i reckon this kit will be 3.5 inch tall mayber taller which means ull struggle 2 fit it in standard GW cases
now more harvesters of doom!!!
and here is how it looks so far
now from here on it gets fiddly as im keeping it a all seperate untill i fgure out how much space i need and for painting
next the riders were glued and the seats and here they are
it wont be fully built untill iv painted it so stay tuned
apoligies for uploading it and forgetting to add the pics lol
Subscribe to:
Posts (Atom)